If you have applied the macOS Catalina upgrade, you may have noticed a new volume on your Mac, "Macintosh HD - Data". This new volume is part of a volume group, which is a new concept in macOS Catalina. We discuss volume groups in detail here, but the remainder of this article aims to answer your questions about how CCC handles this new volume structure and what you have to do, if anything, to adjust your backups for macOS Catalina.
Maybe. If you are making a simple backup of your startup disk to a dedicated backup disk, then no, you do not have to make any changes to the destination unless CCC specifically recommends it. CCC will automatically make the changes required for your destination to be a bootable backup of macOS Catalina. If your destination volume is encrypted, however, see the question later in this document for information specific to encrypted destinations.
If you have multiple tasks that back up to the same destination, however, then now is a good time to revisit your backup "hygiene". Ideally, each source that you back up will have a dedicated volume on the destination. This is particularly important when one of the sources is a Catalina startup disk. See this section of CCC's documentation for guidance on how to configure your destination device to accommodate backups of multiple source volumes:
No. When you select your startup disk (e.g. Macintosh HD) as the source for your backup task, CCC will automatically back up both volumes in that volume group.
Many external hard drives are shipped with a Windows-centric format and partitioning scheme. That partitioning scheme can't accommodate Apple's APFS filesystem, so before you can use your backup disk for making a bootable backup of your Catalina startup disk, you must make sure that it is partitioned with the correct partitioning scheme. This section of CCC's documentation walks you through the steps for configuring your backup disk:
Disk Utility's interface for performing this simple task is surprisingly unintuitive, so here is a summary of the process with some emphasis on the steps where people often go awry:
- Open Disk Utility
- Choose Show all devices from Disk Utility's View menu. This is a very important step!
- Choose the parent device of your destination volume in the sidebar – don't click on the backup volume itself, click on its parent device. If you don't click on the parent device, you won't be able to change the partition scheme.
- Click on the Erase button in the toolbar. Don't click on the Partition button! That would seem like the obvious choice, but you cannot actually change the partitioning scheme in the Partition interface.
- Set the Scheme to GUID Partition Map and the Format to APFS, then click the Erase button.
If you're still having trouble correcting the partition scheme, you may find this video demonstration helpful.
Because macOS Catalina leverages volume groups for the startup volume, creating a bootable backup requires an APFS formatted destination volume. HFS+ is no longer an option for booting macOS starting with macOS Catalina. For your convenience, CCC will automatically convert your HFS+ formatted backup volume to APFS as necessary and create a volume group on the destination. This conversion is the same conversion that took place on your startup disk when you upgraded to High Sierra or Mojave, with one notable exception: CCC tells you that it's going to convert the destination, and gives you the opportunity to decline the conversion. The conversion is non-destructive — any data that you have on the destination volume will remain in place, the only thing that changes is the format of the volume.
Typically there is no reason to decline the conversion. The conversion is non-destructive, and it's required for making a backup of the system. If your backup volume is dedicated to your CCC backup task, then converting the destination to APFS is the right choice.
However, if your destination volume is not dedicated to your CCC backup task or if you're not intending to back up the macOS System files, you should consider how the other uses of your destination might be affected by the conversion. For example, Time Machine is not currently compatible with APFS as a destination, so converting a destination volume that contains a Time Machine backup would break the Time Machine backup. CCC specifically avoids converting Time Machine backup volumes. Another example – if you're only backing up a single folder or handful of folders from your startup disk, you should configure a folder-to-folder backup instead, which won't require any conversion of the destination.
No. In particular, you should not use the Finder to copy items to the root level of your Catalina backup disk. Finder will copy that data to System volume within the group, and when the System volume is subsequently updated, any non-system files could be permanently deleted from that System volume. If you want to store other items on your backup disk that are unrelated to the backup of the system, create a separate volume on that disk for that purpose (see the following question for instructions).
If your destination volume is already APFS formatted, but you do not want to make your bootable backup in that volume, you can simply add a new volume to the existing APFS container:
- Open Disk Utility
- Select your destination disk in Disk Utility's sidebar
- Click the "+" button in the toolbar
If your destination volume is not APFS formatted, and you cannot or prefer to not convert the volume to APFS, you can create a dedicated partition on your destination disk for CCC to use. To create the partition:
- Open Disk Utility
- Select your destination disk in Disk Utility's sidebar
- Click the Partition button in the toolbar
- Click the "+" button to add a partition to the disk
- Set the name and size of the partition to your preference
- Choose APFS as the format
- Click the Apply button
If you were keeping other data at the root level of your backup disk that isn't on your startup disk, then that data is still on your backup disk, but it will be harder to find in the Finder due to the volume group changes that are applied for a backup of the Catalina startup disk. If your backup disk is named "CCC Backup", right-click on the "CCC Backup - Data" volume in CCC's sidebar and select Reveal in Finder to reveal that content.
It depends on how much data you have on your destination volume, the performance of the destination device, and the degree to which the destination volume is fragmented. It can take a while, but CCC won't wait for more than two hours for the conversion to complete. If it's taking longer than two hours, then CCC will recommend that you erase the destination volume instead, which will resolve any performance issues that are directly caused by filesystem fragmentation. If CCC issues this recommendation and you prefer to wait out the conversion rather than erase the volume, you're welcome to convert the volume in Disk Utility instead (the option is in the Edit Menu).
Encrypted HFS+ volumes cannot be automatically converted to APFS, and CCC cannot create an APFS volume group using an encrypted APFS volume. When you select a Catalina+ startup disk as a source and an encrypted volume as a destination, CCC will disallow the selection and suggest that you erase or decrypt the destination volume. Erasing the destination volume is the simplest approach, and you can find detailed instructions for doing that here: Preparing a hard drive for use with Carbon Copy Cloner
If you're making a backup to an encrypted volume that you've backed up to before (e.g. on Mojave and previous OSes), you may not want to erase all of the data on that volume. You can decrypt the destination volume with one of the following methods:
A: Boot from the backup volume, open the Security Preference Pane, disable FileVault
B: Decrypt the volume in the Terminal application. E.g. for an HFS+ formatted destination:
diskutil cs decryptVolume "/Volumes/CCC Backup"
Or for an APFS-formatted destination, get a list of user IDs associated with the encrypted volume, then use one of the "Local Open Directory User" UUIDs from the output of the first command with the second command:
diskutil ap listUsers "/Volumes/CCC Backup"
diskutil ap decryptVolume "/Volumes/CCC Backup" -user B44348A3-68DF-4B7B-800D-47FE38711178
Replace "B44348A3-68DF-4B7B-800D-47FE38711178" with a UUID produced by the first command.
Wait for decryption to complete
If you've chosen to decrypt the destination rather than erase it, you'll have to wait for the decryption process to complete before you proceed with your backup task. Decryption will continue in the background while you're booted from your production startup disk. macOS doesn't offer a convenient method to see conversion progress, but you can type diskutil apfs list (or diskutil cs list if the applicable volume is HFS+ formatted) in the Terminal application to see conversion progress.
Re-enabling FileVault on your Catalina backup volume
After you have run your backup task to a non-encrypted volume, you can then boot from the backup and re-enable FileVault in the Security & Privacy Preference Pane.
No, this is a one-time task that is required for CCC to be able to make adjustments to the destination volume that are required for macOS Catalina. Once you have established a Catalina backup, you can reenable FileVault and your future backups will work without any additional intervention.
If you prefer to keep your encrypted backup as it is and forgo the creation of a bootable backup of your macOS Catalina startup disk, you can configure your backup task to back up only the Data volume of your startup disk:
- Open CCC and click the Show Sidebar button in CCC's toolbar if it is not already visible
- Select your backup task in the sidebar
- Drag the Macintosh HD - Data volume from CCC's sidebar into the Source selector
- Save the task
With this configuration, CCC will not impose any requirements on the format or encrypted nature of the destination volume. Because this destination will not be bootable, we recommend that you remove any existing System folders from the destination volume to avoid any ambiguity about the functionality that this volume provides.
Yes. Your Catalina startup disk has two separate volumes, a read-only System volume, and a writable Data volume where all of your data is kept. The System volume has about 10GB of content, and CCC will back that up first. When CCC has finished copying the System volume, CCC will then proceed to back up the contents of your Data volume. The System volume will only get modified when you apply macOS updates, though, so you won't see this volume getting copied frequently — CCC will only update the System volume on the destination when the System volume on the source has been modified.
Yes, you can dismantle a volume group in Disk Utility. You may want to do this if, for example, you cloned your startup disk to a volume that was not intended to be dedicated to your backup task. The procedure is relatively simple — you simply delete the System volume, then rename the Data volume, then remount the volume. If your backup disk was named "CCC Backup", for example, you would do the following:
- Open Disk Utility
- Choose Show all devices from the View menu
- Select the CCC Backup volume in the sidebar — this is the System volume in the group.
- Click the — button in the toolbar to delete that volume
- Select the CCC Backup - Data volume
- Click the Unmount button in the toolbar
- Click the Mount button in the toolbar to remount that volume
- Change the name of the volume back to CCC Backup
You won't find a legacy _CCC SafetyNet folder on the destination if snapshot support is enabled on that volume. Instead, select the destination Data volume in CCC's sidebar to see a list of SafetyNet snapshots.
If snapshot support is not enabled on your destination volume, then the SafetyNet folder can be difficult to navigate to in the Finder. It's still located at the root level of your destination's Data volume, but the Data volume is hidden by default in the Finder. To reveal it in the Finder, right click on your CCC Backup - Data volume (for example) in CCC's sidebar and choose the Reveal in Finder option.
If you have ever restored content back to your production startup disk while booted from a CCC backup, then there may have been a _CCC SafetyNet folder placed at the root of that volume. When you upgrade to Catalina, the macOS installer will relocate any content that is at the root of the startup disk to Users > Shared > Relocated Items > Security. You will also find a PDF in that folder explaining why the content was moved there. In short, the content was moved there because it is very difficult to find content at the root level of the Data volume of your startup disk on macOS Catalina.
If you attempt to delete that SafetyNet folder (and you certainly may delete that folder), the Finder may claim — falsely — that the folder cannot be deleted because some items are in use. In fact, nothing in that folder is in use, but some of the older system items may be protected by System Integrity Protection. You can learn how to dispose of this content in this section of CCC's documentation: